If you’re looking for a saw that’s easier to use, but still offers excellent accuracy, you should consider a plunge track saw. These saws slide on a rail during the application, allowing you to make long, accurate cuts. They also offer kickback protection. Plunge track saws are useful for cutting worktops because they can be fed into a workpiece from the start, or plunged directly where you want to cut.
But, why are plunge track saws more accurate than circular saws?
Plunge-cut track saws provide kickback protection
Track saws can have different speed settings. The highest speeds are suitable for cutting softwoods, while lower speeds are recommended for cutting dense woods. Lowering the speed of the blade will help prevent kickback and burn marks.
But lowering the speed will also result in slower blade rotation. To avoid kickback, track saws are available with safety features that help reduce the risk of kickback.
Plunge-cut track saws are safer than their counterparts because they feature a track stabilizer. They are also less prone to kickback because users must press the plunge button to engage the blade.
Another important feature is the blade shroud. Once the user releases the pressure, the blade retracts, stopping and preventing kickback. This feature also helps prevent dust from getting into the cutting area.
Most track saws incorporate an anti-kickback device that prevents the blade from jerking backward. It also helps extend the battery life by up to 40%. The anti-kickback device is dependent on the brand of guide rail used, so it may not work with other brands’ tracks.
Track saws with anti-kickback protection also have a riving knife and a splinter guard. These features will prevent the saw from backsliding when the blade binds. The splinter guard on the cut side will prevent chip-out when the saw’s blade binds.
Plunge-cut track saws offer kickback protection and reduce the risk of injury. They also have the advantage of not leaving a sticky residue on the work surface. The tracks have non-slip strips and plastic runners. They also have zero clearance splinter guards to prevent the blade from pulling the wood fiber upward.
Track saws are safer than table saws because the blade is not exposed to the work surface during the cut. They are usually enclosed in housings. Some models have built-in anti-kickback sensors. They are also safer than circular saws when making long cuts. They also provide a predetermined path.
They have a scoring cut setting
Unlike circular saws, plunge track saws can be adjusted to make an accurate scoring cut. The scoring cut setting on plunge track saws is a better way to ensure that your cut is square and smooth. This setting is available on most plunge track saw models.
Plunge saws also have excellent dust extraction. Their blade guards are fully enclosed and dust is sucked out through a dust extraction port. This makes plunge saws the best choice for cutting large boards and trimming sheet goods. They also produce clean, splinter-free cuts, and are ideal for trim work.
Plunge track saws are more accurate because the blade can sink through the board’s face. This allows the saw blade to “walk back” across the surface, which helps you make accurate cuts. Plunge track saws are also easier to use because of their scoring cut setting.
Plunge track saws have a bevel lock and variable speed settings. This makes them more precise than circular saws. The settings are easy to adjust and they have no slop. Changing the depth of cut is easy with a plunge track saw, as the bevel setting is a quick touch. The Bosch plunge track saw is easy to use and has an extra-large bevel shoe that will not overheat or bind the blade.
Plunge track saws are more accurate and reliable than circular saws because of their scoring cut setting. The cost of plunge track saws varies, but they are far less expensive than other track saws. One disadvantage is that they are not equipped with soft-start features.
One important factor that can affect the accuracy of a track saw is its cord length. A plunge track saw with a long cord is better for framing or roofing jobs because you’ll have less cord snagging during cutting.
Track saws are great for cutting sheet materials and other materials. They can be used for cutting plywood, hardwood, and lumber. Plunge track saws have a bevel capacity of up to 47 degrees, making them more accurate than circular saws. Most plunge track saws are ideal for cutting square or rectangular pieces.
You can take a look at our best track saws and best circular saws guides.
They are easy to use
A track saw is a tool that has adjustable bevels to cut at different angles. This feature allows you to make cuts that are 90 degrees square or 45 degrees, which can save you a step in the production process. In addition, track saws with adjustable bevels will eliminate the need for edge banding and will increase the amount of surface area exposed to glue. These tools are available in cordless or corded versions.
These track saws have variable speeds and can plunge cut solid wood and plywood. They also have an overload protection system, which prevents overheating of the motor. They are also easy to use and are equipped with a spring-loaded riving knife to keep the kerf open and prevent the material from pinching the blade.
A plunge track saw is more accurate than a circular saw. These saws are very easy to use and are suited to beginners. Plunge track saws are also easier to store. These track saws are more precise and can cut a variety of materials, such as sheet goods and 3/4 plywood. Compared to a circular saw, plunge track saws are better for cutting sheet goods and 3/4 plywood than they are for cutting hardwood and plywood. Whether you prefer a cordless or corded track saw is a personal choice.
Another difference between a plunge track saw and a circular saw is the blade. The plunge saw can be laid directly on the material to cut, while a circular saw requires that you bring the material to the saw. This means that the plunge track saw has the advantage of being easier to use for long rip cuts than a circular saw.
When deciding between a track saw and a circular saw, consider the following criteria: budget, cutting speed, and weight. You may not need to purchase a track saw if you are making short cuts and frequently move from one place to another. If you have an existing circular saw, a plunge track saw is not the best choice.
A track saw is more convenient for home garages and small shops. However, if you are doing finish work in a difficult area, you may need a circular saw. Track saws are also cleaner, as they usually have built-in dust collectors. They also have a hooded blade to reduce the amount of dust they produce.
They are more flexible than circular saws
Plunge saws are more flexible than circular saws in several ways. For example, users don’t have to start cutting at the edge of a piece to get a clean cut. Instead, they can start cutting anywhere along the track. This flexibility makes it easy for users to make multiple, similar cuts.
Plunge track saws are more flexible in cutting large pieces of wood. A circular saw can be a good choice if you only need to cut 2×4 lumber. But it can be inconvenient to set the track on a small piece of wood, and can’t cut very accurately.
Plunge track saws are more flexible, but they can be noisy and require hearing protection. They have more versatility and are cheaper than circular saws. However, they do require more maintenance.
Plunge track saws are versatile and faster than circular saws. They can be used for a variety of tasks and are portable. Their blades are also adjustable. They can make beveled, cross-cut, and rip cuts with the grain. They can also be used for tile, wood, and metal.
Plunge track saws are also more flexible than circular saws. They are better at making big things smaller. They have adjustable speeds and a plush motor. They are also safer for longer cuts. They also have a predetermined path for the blade to follow. Some have cam locks that prevent the saw from slipping off the track.
When using a plunge track saw, it’s important to mark the cutting line on the board before using the plunge track saw. Otherwise, the blade will cut the wrong material. This is why the blade needs to be adjusted so that it cuts the material cleanly. Some track saws also have a score cut button that will give you the cleanest cut possible.
Sign up for our newsletter to get the best of The Sized delivered to your inbox daily.
