If you’re looking to cut laminate flooring, you’ll need a good saw. There are different types of saws available, including Jigsaws, Table saws, and Circular saws. These tools all have their own advantages and disadvantages. Here are some tips on how to choose the best saw for cutting laminate flooring.
Best Saws For Cutting Laminate Flooring Reviews
Table saws
- Your purchase includes one Dewalt table saw, 10inch 24-tooth carbide blade, rolling stand, push stick,...
- Other Specs: Max rip to left of blade – 22inch | Max rip to right of blade – 32-1/2inch | Max width...
- Rolling stand designed for easy set up and breakdown with excellent stability
- Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate
- Features a 15.0A high torque motor with the power to cut pressure treated lumber and hardwoods
When it comes to cutting laminate flooring, the best table saw for the job is the one with special blades designed for this purpose. These blades are made of tungsten carbide and are resistant to abrasion and heat damage. They also have a thin kerf that makes it easier to cut through laminate flooring without much waste. Lastly, they have a low hook angle for an even cut.
When deciding on a table saw for cutting laminate flooring, it’s important to know the right measurements. The proper size blade will prevent chipping and ensure a clean cut. You should also consider the blade’s diameter, arbor size, and number of teeth. There are several different types of saws for cutting laminate, including circular and miter saws.
You can use a blade with a rough or fine tooth to cut the laminate. However, you should remember that a rough blade can splinter the material, so choose a blade with a fine tooth. A blade designed specifically for cutting laminate will cut on the downstroke as opposed to the upstroke, ensuring that the board will not be damaged.
Another type of saw is the hand saw. These saws are portable, which makes them useful for cutting laminates. You can use them to cut the laminate up to nine inches in width. They can also cut solid wood and engineered flooring up to 15 mm thick. They’re also useful for cutting fiber cement siding, vinyl tiles, and some other materials.
A table saw can be used to rip or cut the planks of laminate flooring. They are also great for shaping the laminate, as they are more accurate and easier to control. If you’re installing the flooring in a room where pipes are present, you may need to use a hole saw to cut around these pipes.
You can also take a look at our guide about the best table saws.
Circular saws
- DEWALT 7 1/4 circular saw is among the lightest saws in its class (8.8 lbs.)
- Electric brake of the corded circular saw stops the blade after trigger is released
- 15 amp motor of the compact circular saw delivers power for even the toughest applications
- 57degree beveling capacity with stops at 45 degree and 22.5 degree
- Depth of cut capacity of 2 9/16 inch
Circular saws for cutting laminate flooring can be useful for a number of jobs. These saws can be used for both straight and curved cuts, and the right type of blade can help ensure that you get a perfect cut every time. You can also use a guide rail to set the correct angle for your cut.
The saws used for cutting laminate flooring should be specifically designed for cutting this material. The blade should be sharp and carbide-tipped. A good quality saw blade can be re-edged several times for better results. A circular saw with a miter/chop blade should never be used to cut laminate flooring.
Before cutting the laminate flooring, it is important to mark the cut line on the backside of the flooring. This ensures that the cut line will not be damaged during the cutting process. Working on the backside of the laminate flooring will also help prevent kickbacks. Once the laminate flooring piece is cut, it can be slid into place with the help of spacers.
The saw blades used for cutting laminate flooring should be carbide-tipped to increase their durability and sharpness. These saw blades last about 30% longer than other blades and can be sharpened easily. If you have an old circular saw blade lying around, it can be reused and sharpened for free. Moreover, you can recycle your old circular blades to help the environment.
You can buy circular saws that have special blades for cutting laminate flooring. These saws come with a blade with 40 tungsten carbide teeth, which are resistant to abrasion and heat damage. They also feature a thin kerf, which helps you cut laminate flooring with less waste. Additionally, the lower hook angle of the teeth makes the cut smoother.
You can also take a look at our guide about the best circular saws.
Jigsaws
- ERGONOMIC TOP-HANDLE: soft-grip areas supply a solid, comfortable grip
- CONVENIENT: featuring a tool-less blade change system and fast insertion with a blade ejection lever that...
- 4-IN-1: 4 orbital action tool settings provide different blade strokes for smooth to aggressive cuts for...
- CONTROL: variable speed dial sets maximum speed and accelerator trigger controls operating speed;...
- SECURE: includes a large, sturdy die cast foot with steel insert and on board bevel wrench;...
If you want to cut laminate flooring into shapes, a jigsaw is a good choice. A jigsaw has a sharp, metal blade that can cut at an angle and the fine teeth will show you which way to cut.
However, be sure to take proper precautions when using a jigsaw, as they are dangerous to use. Before you begin, make sure to measure the width and length of the laminate floor carefully, as a wrong measurement can lead to miscutting.
Before you begin cutting laminate flooring, make sure to mark the area you want to cut. You may want to use a handsaw or a circular saw with 18 teeth per inch. For precision and accuracy, use a paper pattern to guide the blade. Jigsaws are also excellent for cutting laminate in curved shapes.
Jigsaw blades for cutting laminate flooring should be high quality and designed for a single task. Once the teeth of the blade wear down, they will no longer be able to cut the laminate flooring without splintering or damaging it.
Fortunately, quality jigsaw blades are designed to last a long time. However, you should always experiment with a variety of blades before you make a final decision. To prevent damage to your jigsaw blades, be sure to store them in a lidded jar.
When it comes to choosing a saw for cutting laminate flooring, choose a saw with a carbide-tipped blade. These blades last up to 30 percent longer than other types of blades and can be sharpened.
If you already own a jigsaw, you can reuse the blade by purchasing a new one for less than $15. Remember, the right saw blade for laminate flooring has a high tooth count and few large teeth. The tooth count is comparable to the grit number on sandpaper.
You can also take a look at our guide about the best jigsaws.
Carbide-tipped saws
- Ultra-coated blades provide reduced pitch build-up
- M shaped tooth has two cutting points to provide the speed of 24 tooth with the finish of 48 tooth
- High grade C-3, fine-grain Tungsten carbide tips for longer durability
- Greater wear area and more cutting tips increase the life up to 2X more than a traditional framing blade
- Exclusive dual-beveled tooth face has two 10° angles
If you are considering purchasing a saw blade for cutting laminate flooring, you might want to think about a saw blade with a carbide-tipped edge. The teeth on this type of blade are made of tungsten carbide, and they resist abrasion and heat damage.
They also have a thin kerf, which helps the saw cut through laminate flooring with minimal waste. In addition, the blade’s alternating tip faces provide extra stability and maintain the same kerf throughout the cut. Moreover, this type of saw blade is suitable for table saws and miter saws with a standard 5/8-inch arbor.
Regardless of which type of saw you choose, it is vital to know the proper measurements for your project before you begin. Using the wrong measurements can result in uneven edges.
Also, it’s important to wear safety gear such as goggles and a face mask. Finally, choose the right blade. A saw blade with carbide-tipped teeth is recommended for cutting laminate flooring, as it will yield a professional-grade cut every time.
Carbide-tipped saws are ideal for cutting laminates and other hard materials. They have expansion slots that allow the metal to cool while it cuts. Another type of saw blade for cutting laminate flooring has fewer teeth and is ideal for making fine, precise cuts.
Jigsaws are easier to use than circular saws, but they require a sharp blade and aren’t as powerful. However, if you want to make a straight edge, a circular saw is the best choice. If you plan to use a jigsaw, make sure the blade is carbide-tipped and is rated for laminate material.
Miter saws
- AXIAL GLIDE SYSTEM: patented glide system allows wider cross cuts and better alignment while also being...
- CAPACITY: expanded cutting capacity, 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity...
- ADJUSTABLE: provides easy adjustments with a large, easy-to-read uniform bevel and stainless steel miter...
- PRECISION: square lock quick release fences lock fence 90 degree to the table and requires no adjustment,...
- EASE OF USE: upfront bevel controls all metal bevel lock lever and range selector located upfront for...
A miter saw is a tool for cutting laminate flooring. Its adjustable blade angle allows you to achieve precision end cuts. It works well for laminate flooring that is more than 1 inch thick. For the best results, cut the laminate flooring with the finish side up. Otherwise, you may end up with uneven flooring.
Miter saw blades are generally between 10 and 12 inches in diameter. Selecting the correct size for your project can be a bit confusing. However, the size of the blade is very important for cutting laminate flooring. You will need to mark the location where you want to cut. Also, choose a saw that allows you to adjust the angle of the blade up to 50 degrees.
There are several kinds of saws for cutting laminate. There are portable saws, circular saws, and jigsaws. The portable tools are convenient to use, but they do produce a lot of sawdust. If you need to cut long planks of laminate, consider using a jigsaw or circular saw.
The best miter saw for cutting laminate flooring has a blade made specifically for the purpose. They are designed for cutting wood, laminate flooring, and melamine. The blades are made from hardened steel to resist warping and bending.
The blades used in miter saws are typically 10 to 12 inches in diameter. However, the saws can accommodate larger or smaller blades for precise cutting. The thickness of the blades is also important. A thin kerf is better for cutting laminate than a wide one.
A miter saw is a versatile tool that can cut laminate floors at a 90-degree angle, 45-degree angle, and any angle between. It can also cut straight across the plank. Choose the blade that is right for the job at hand, and make sure to cut the laminate on the right side first.
You can also take a look at our best band saws, best saw for cutting plywood, and best track saws guides.
Sign up for our newsletter to get the best of The Sized delivered to your inbox daily.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
